820 County Road 229
Freeport, TX 77541
979-415-0254 (office)
774-230-4932 (sales)

Fractional Tubing

Fractional tubing starts at 1/32″ O.D. and continues in increments of 1/32″ to 3.00”. Available in T304/T304L & T316/T316L seamless or welded and drawn construction (annealed temper), fractional tubing is often used in commercial applications that require corrosion resistance and good strength. Normally available in commercial specifications (i.e. ASTM-A-269, A-213, A-249). Standard tolerances are ±0.005” OD and ±15% wall for sizes <0.50”. For 0.50” to <1.50” standard tolerances are ±0.005 OD and ±10% wall. For fractional tubing 1.50” and greater ” standard tolerances are ±0.010 OD and ±10% wall. Custom tolerances, sizes, metals and specifications are available upon request.

Used in many different industries ranging from medical to instrumentation applications. Welded and drawn can often be substituted for seamless because it usually has the same, if not better, appearance, tolerances and concentricity.
standard fractional
fractional_2
fractional_3

fractional_5
fractional_6
fractional_7
fractional_8
fractional_9
fractional_10